Products
-
Tap Adaptor 1/2" + 3/4"
Gf$1.50• Internal thread to be screwed to the tap• Gripping surface• Male fitting for connection to the hose connector
$1.50 -
Tap-N-Go 109 Head M8M-M10F x1.25 SX MY20
Tecomec$15.00Tap & Go head for all types of brushcutters on the market. Manual line load.Head size diameter 109 mm
$15.00 -
Tap-N-Go 130 Head M8M-M10F x 1.25 SX MY 20
Tecomec$18.00Tap & Go head for all types of brushcutters on the market. Manual line load. Head size diameter 130 mm.
$18.00 -
TC1000-3: Manual Tile Cutter 1000mm
Makute$75.00Max Cutting Width: 1000mmMin Cutting Width: 20mmTile thickness range: 5-15mm
$75.00 -
TC800-3: Manual Tile Cutter 800mm
Makute$70.00Max Cutting Width: 800mmMin Cutting Width: 20mmTile thickness range: 6-15mm
$70.00 -
Sold out
TCP158: Single Impeller Centrifugal Pump 1 HP
Taifu$87.00Single impeller centrifugal pumpPower 1 HPMaximum flow rate 100 l minMaximum head 30 mMaximum suction 8 mConnection 1 inch x 1 inch
$87.00Sold out -
Sold out
TCP170: Single Impeller Centrifugal Pump 1.5 HP
Taifu$131.00Single impeller centrifugal pumpPower 1.5 HPMaximum flow rate 120 l minMaximum head 38 mMaximum suction 8 mConnection 1 inch x 1 inch
$131.00Sold out -
TCV-32: Vibrator Shaft 32mm 6m
Toku$170.00Shaft Length: 6mPower Required: 1.5- 2HPVibrator Frequency: 183- 200HzAmplitude: 1.2 mmHead Diameter: 32 x 480 mmVibration per Minute: 9000-12500We...
View full details$170.00 -
TCV-38: Vibrator Shaft 38mm 6m
Toku$185.00Shaft Length: 6mPower Required: 1.5- 2HPVibrator Frequency: 183- 200HzAmplitude: 1.6 mmHead Diameter: 38 x 500 mmVibration per Minute: 9000-12500We...
View full details$185.00 -
TCV-45: Vibrator Shaft 45mm 6m
Toku$200.00Shaft Length: 6mPower Required: 1.5- 2HPVibrator Frequency: 183- 200HzAmplitude: 2.0 mmHead Diameter: 45 x 505 mmVibration per Minute: 9000-12500We...
View full details$200.00 -
TCV-60: Vibrator Shaft 60mm 6m
Toku$350.00Shaft Length: 6mPower Required: 1.5- 2HPVibrator Frequency: 183- 200HzAmplitude: 2.4 mmHead Diameter: 60 x 505 mmVibration per Minute: 9000-12500We...
View full details$350.00 -
TD-H: Vibrator Drive Unit with Electrical Motor
Toku$275.00Power 2kWVoltage 220V 50HzCurrent 7ASpeed 2850 RPMWeight 14Kg
$275.00 -
TD950 ECE El. Cable Hoist 950Kg, 3 Phase, 40M
Ece$950.00Model: TD 950Load Capacity: 950KgRope Length: 40mCable Diam: 7mmBreaking Strength: 31,66KNLifting Speed: 14m/minElectric Motor: 3KWPower: Three Pha...
View full details$950.00 -
Sold out
Technology Plasma 41: Plasma Cutting Machine
Telwin$1,050.00Voltage: 230VCurrent Range: 7-40ADuty Cycle: 30 @ 35APower Consumption (Max): 4KWMax Cutting Thickness: 12mmCompressed Air Capacity: 100L minCompre...
View full details$1,050.00Sold out -
Technology Plasma 54 Kompressor
Telwin$1,165.50Single phase voltage 230 v 50hzPower factor 0,7Max cutting thickness 10 mmCurrent range 7 - 40 aMax absorbed current 27,5 aProtection degree ip 23M...
View full details$1,165.50 -
Sold out
Technology TIG 182 AC/DC
Telwin$1,875.00Voltage: 230VCurrent Range: 5-160ADuty Cycle: 20 @ 160ACurrent at 60 Duty Cycle: 85APower Consumption (60): 2.5KWPower Consumption (Max): 4.3KWWeld...
View full details$1,875.00Sold out -
Sold out
Technology TIG 230 DC: Welding Machine TIG
Telwin$1,350.00Voltage: 230V, 1PhCurrent Range: 5-220ADuty Cycle: 30% @ 220ACurrent at 60% Duty Cycle: 125APower Consumption (60%): 3.6KWPower Consumption (Max): ...
View full details$1,350.00Sold out -
Sold out
Technomig 180 Dual Synergic EURO
Telwin$925.00Mains Voltage: 230V 50Hz Single PhaseMax Absorbed Power: 3.8kWMax Absorbed Current: 24ACurrent Range: 20 - 170A No Load Voltage: 60VSteel Welding W...
View full details$925.00Sold out -
Sold out
Tecnica 211/S + Carry Case
Telwin$365.00Voltage: 230VCurrent Range: 15-180ADuty Cycle: 18 @170ACurrent at 60 Duty Cycle: 105APower Consumption (60): 2.9KWPower Consumption (Max): 4.8KWWel...
View full details$365.00Sold out
