Industrial Equipment

Water Repellant/Waxer

Rust Remover

For cleaning off scale and cement.

Car Interior/Carpet Foaming suitable to use in foamers and steam generators.

Normal Floor Cleaner suitable to use in floor scrubbers.

Normal Degreaser suitable to use in floor scrubbers.

High Pressure/Car Body/Heavy Equipment Cleaning suitable to use in pressure cleaning pumps.

Car Body/Automotive Foaming suitable to use in foamers and steam generators.

Strong Degreaser suitable to use in floor scrubbers.

Voltage: 7.2-volt rechargeable lithium-ion batteryBattery charge time: 90 in 1.5 hVoltage: 230 VWarm-up time: under 15 sec.Glue sticks: 7 mmMelt te...

Power input: 500 WVoltage: 230 VMax. Cutting stroke: 52 mmNo load rpm: 8000-33000 min-1Max. Wheel diameter at 45 m s: 30 mmCollets: 6 8 mmJournal d...

Power input: 1400 WVoltage: 230VCutting capacity in 90: 0-70 mmCutting capacity in 45: 0-49 mmBlade diameter: 200 mmBlade hole diameter: 30 mmNo lo...

Cutting depth in wood 60 mm No load stroke rate 0-2700 min Bevel cutting angle 0Stroke length 16 mm Weight 2.2 Kg Voltage 230V 50Hz Power input 500 W

Power input: 1200WVoltage: 230VFlexible backing pad diameterMax. sponge bonnet diameter: 160mmNo load rpm: 6002800 min-1Spindle thread: M14Weight: ...

Power input: 550WVoltage: 230VNo load rpm: 800033000 min1 Max. wheel diameter at 45 m s: 25mm Collets: 6 8mm Journal diameter: 43mmWeight: 1.1Kg

Jaw width: 100 mmJaw capacity: 100 mmClamping size: 125 mmWeight: 1.5 kg

Drilling capacity in steel wood concrete 10 20 10 mmVoltage: 18 VCapacity: 2 AhNo load rpm: 0350 01350No load impact rate: 5250 20250Torque setting...

Voltage: 10.8 VCapacity: 2.0 AhNo load rpm: 0350 01350No load impact rate: 5250 20250Keyless chuck: 10 mmMax. torque: 34 NmTorque settings: 20 + 1B...

Drilling capacity in concrete steel metals wood 13 13 16 20Voltage: 230 V 50 HzPower input: 500WNo load rpm: 03000No load impact rate: 45000Spindle...

Drilling capacity in steel metals wood 10 10 20 mmVoltage: 230 V 50 HzPower input: 450 WNo load rpm: 03000Spindle thread: UNF 1 220Chuck capacity: ...

Drilling capacity in concrete steel wood 24 13 30 mmVoltage: 230 V 50 HzPower input: 720 WNo load rpm: 01050Rated rpm: 0840No load impact rate: 048...

Power input: 1400 W, 230 V, 50 Hz Drilling capacity in concrete 52 mm Impact rate in "High Power": 2800 Impact energy: 10 J Impact energy in "High ...

Voltage: 230 V 50 HzPower input: 1010 WDrilling capacity in concrete 40 mmNo load rpm: 325No load rpm: 350No load impact rate: 3050Impact energy: 7...

Power input: 2200WVoltage: 230V~50HzDisc diameter: 230mmNo load rpm: 6600 min1 Spindle thread: M14Weight: 5.5Kg

Power input: 2000 WVoltage: 230VDisk diameter: 230 mmNo load rpm: 6Spindle thread: M14Weight: 5.6 Kg

Number of step: (2x19)+(2x19) Section 1: height 5090 mm Section 2: height 9360 mm Footprint: 1900x1900 mm (with stabilizers open) Weight: 100 KgSpe...

Number of step (2x15)+(2x15) Section 1 height 4020 mm Section 2 height 7360 mm Footprint 2100x2140 mm (with stabilizers open) Weight 81 KgSpecial a...

Number of step: (2x11)+(2x11) Section 1 height: 3020 mm Section 2 height: 5360 mm Footprint: 1900x2140 mm (with stabilizers open) Weight: 70 KgSpec...

Capacity: 2 Ton Chain Length: 8 m Type: 4 way (Up & Down, Right & Left) Voltage: 380V 50Hz Hoist Motor: 1.25 KW Hoist Speed: 2.9 m/min Trav...

188-3: Flush Cutting Bolt Cutter 35"

188-1: Flush Cutting Bolt Cutter 24"

Motor Power: 1HPCutting Speed: 26-50-73-95 Mt minBlade Size (WXTXL): 27x0.9x2655 mmMachine Dimensions: 1380x460x1050 mmWeight (Net Gross): 160 185K...

Motor Power: 3 4 HPCutting Speed: 27-41-59-78 Mt minBlade Size (WXTXL):19.05 x 0.8 x 2362 mmMachine Dimensions: 1235 x 430 x 955 mmWeight (Net Gros...

Stand for RF-25

Motor: 1HPSpindle Stroke: 130mmSpindle Nose To Column Surface: 260mmCross Table: 585 x 190mmLongitudinal Travel: 340mmCross Travel: 180mmColumn Dia...

Motor : 3 4 HP Stand not included1 Speed motor(standard): 50HZ 95-2150Spindle Taper:MT3 OR R8Spindle Stroke:90mmSpindle Nose to Column Surface:170m...